Pioneer DJ
Amplifiers
Branded products
Complete systems
GROUNDAUDIO
OUR TOP Products
Commodo sociosqu venenatis cras dolor sagittis integer luctus sem primis eget maecenas sed urna malesuada consectetuer
Sale
NX23 Passive Line Array Module (800W)
NX23 Passive Line Array Module (800W) Sale
NX23 Passive Line Array Module (800W)
NX23 Passive Line Array Module (800W)
Sale
9004 Passive High Power Subwoofer
9004 Passive High Power Subwoofer Sale
Sale
JBL SRX 715 Single Top
JBL SRX 715 Single Top Sale
Sale
JBL STX 818
JBL STX 818 Sale
Sale
DOUBLE TOP Pro 5031 Dual 2 Way Speaker Cabinet Pair
DOUBLE TOP Pro 5031 Dual 2 Way Speaker Cabinet Pair Sale
DOUBLE TOP Pro 5031 Dual 2 Way Speaker Cabinet Pair
DOUBLE TOP Pro 5031 Dual 2 Way Speaker Cabinet Pair
Sale
PHT-408
PHT-408 Sale
Sale
DDJ-FLX6
DDJ-FLX6 Sale
DDJ-FLX6
DDJ-FLX6PECIFICATIONS
Main Features
Included DJ Software |
|
|---|---|
Compatible DJ Software |
|
Software System Requirements |
Visit serato.com for its specifications. Visit rekordbox.com for its specifications. |
What’s in the box |
|
Specifications
Width |
26.61 in |
|---|---|
Height |
2.7 in |
Depth |
13.61 in |
Weight |
8.38 lb |
Soundcard |
24 bit/44.1 kHz |
Frequency Range |
20 – 20000 Hz |
Signal-to-Noise Ratio |
104 dB |
Distortion |
< 0.004 % |
Performance Control
Channels |
4 |
|---|---|
Deck Control |
4 / Dual |
Jog Wheel |
206 mm |
Pad FX |
Yes |
Beat FX |
Yes |
Merge FX |
Yes |
Sound color FX |
Yes |
Sampler |
16slot x 4bank |
Hot Cues |
8 |
Manual Loop |
Yes |
Auto Beat Loop |
Yes |
Beat Jump |
Yes |
Slip Mode |
Yes |
Terminals
Inputs |
1 MIC (1/4 inch TRS Jack) |
|---|---|
USB |
1 USB B port |
Outputs |
|
Sale
HDJ-CUE1
HDJ-CUE1 Sale
HDJ-CUE1
HDJ-CUE1Main Features
Type |
Closed, dynamic |
|---|---|
Driver Units |
40 mm dome type |
Cable |
1.2 m short coiled cable (1.8 m extended length) |
What’s in the Box |
1.2 m coiled cable (extended length 1.8 m) Instruction Manual |
Specifications
Weight (without cable) |
215 g |
|---|---|
Maximum Input Power |
2000 mW |
Sensitivity |
104 dB |
Frequency Range |
5 – 30000 Hz |
Impedance |
32 Ω |
Sale
B&C DE800 8OHM
B&C DE800 8OHM Sale
Sale
B&C 8PE21 8OHM
B&C 8PE21 8OHM Sale
Sale
B&C 21 SW152 8OHM
B&C 21 SW152 8OHM Sale
Sale
B&C 12 NDL76 8OHM
B&C 12 NDL76 8OHM Sale
Sale
NX23 Passive Line Array Module (800W)
NX23 Passive Line Array Module (800W) Sale
NX23 Passive Line Array Module (800W)
NX23 Passive Line Array Module (800W)
Sale
9004 Passive High Power Subwoofer
9004 Passive High Power Subwoofer Sale
Sale
JBL SRX 715 Single Top
JBL SRX 715 Single Top Sale
Sale
JBL STX 818
JBL STX 818 Sale
Sale
DOUBLE TOP Pro 5031 Dual 2 Way Speaker Cabinet Pair
DOUBLE TOP Pro 5031 Dual 2 Way Speaker Cabinet Pair Sale
DOUBLE TOP Pro 5031 Dual 2 Way Speaker Cabinet Pair
DOUBLE TOP Pro 5031 Dual 2 Way Speaker Cabinet Pair
Sale
PHT-408
PHT-408 Sale
Sale
DDJ-FLX6
DDJ-FLX6 Sale
DDJ-FLX6
DDJ-FLX6PECIFICATIONS
Main Features
Included DJ Software |
|
|---|---|
Compatible DJ Software |
|
Software System Requirements |
Visit serato.com for its specifications. Visit rekordbox.com for its specifications. |
What’s in the box |
|
Specifications
Width |
26.61 in |
|---|---|
Height |
2.7 in |
Depth |
13.61 in |
Weight |
8.38 lb |
Soundcard |
24 bit/44.1 kHz |
Frequency Range |
20 – 20000 Hz |
Signal-to-Noise Ratio |
104 dB |
Distortion |
< 0.004 % |
Performance Control
Channels |
4 |
|---|---|
Deck Control |
4 / Dual |
Jog Wheel |
206 mm |
Pad FX |
Yes |
Beat FX |
Yes |
Merge FX |
Yes |
Sound color FX |
Yes |
Sampler |
16slot x 4bank |
Hot Cues |
8 |
Manual Loop |
Yes |
Auto Beat Loop |
Yes |
Beat Jump |
Yes |
Slip Mode |
Yes |
Terminals
Inputs |
1 MIC (1/4 inch TRS Jack) |
|---|---|
USB |
1 USB B port |
Outputs |
|
Sale
HDJ-CUE1
HDJ-CUE1 Sale
HDJ-CUE1
HDJ-CUE1Main Features
Type |
Closed, dynamic |
|---|---|
Driver Units |
40 mm dome type |
Cable |
1.2 m short coiled cable (1.8 m extended length) |
What’s in the Box |
1.2 m coiled cable (extended length 1.8 m) Instruction Manual |
Specifications
Weight (without cable) |
215 g |
|---|---|
Maximum Input Power |
2000 mW |
Sensitivity |
104 dB |
Frequency Range |
5 – 30000 Hz |
Impedance |
32 Ω |
Sale
B&C DE800 8OHM
B&C DE800 8OHM Sale
Sale
B&C 8PE21 8OHM
B&C 8PE21 8OHM Sale
Sale
B&C 21 SW152 8OHM
B&C 21 SW152 8OHM Sale
Sale
B&C 12 NDL76 8OHM
B&C 12 NDL76 8OHM Sale
Sale
VIO L210 2 Way Active Line Array System
VIO L210 2 Way Active Line Array System Sale
VIO L210 2 Way Active Line Array System
VIO L210 2 Way Active Line Array SystemDETAILS
As a result of many years’ experience, VIO L210 reaches the next level among dBtechnologies’ speaker range aimed at larger sound reinforcement applications. A unique internal acoustic design and advanced sound processing merge to deliver outstanding performances in terms of sound pressure, coverage coherence, intelligibility and sound definition.
VIO L210’s premium low-freq transducers, positioned in a V form and sealed in a bass reflex wooden enclosure, have been custom designed to improve efficiency and to last in high stress conditions, providing an accurate transient response and an extended low-end reproduction.
One single 3” voice coil compression driver (1.4” exit throat) accurately delivers high frequencies. A brand new waveguide contributes to create a cylindrical wavefront, allowing a very precise high-frequency directivity control, much to the advantage of the system’s throw distance.
The acoustic enclosure is completed by two massive aluminium phase plugs located in front of both woofers which acts as a prosecution of the constant directivity high-frequency waveguide.
Each phase plug features 26 diamond-shaped holes aimed at reducing any interference within the crossover zone while improving frequency and transient response.
ADVANCED DSP PAIRED WITH NOTABLE EFFICIENCY
The module features a highly efficient Class D Digipro G3 900 W RMS amplifier which is perfectly capable of achieving 135 dB SPL.
A perfectly coherent coverage is granted even at a long distance thanks to advanced sound processing with FIR filters.
The pre-amp module is also equipped with a digital optical isolation which avoids audio coupling, preventing any noise created by potential differences.
SMART RIGGING HARDWARE & ACCESSORIES TO SPEED UP SET UP OPERATIONS
The VIO L210 comes with a built-in 3-point rigging system allowing a smooth and fast set up of the system. The 2 front links easily connect the modules from every angle. The back central rigging strand is equipped with a hook type link to set the relative splay angles determined via the prediction software dBTechnologies Composer. While lifting up the array, the rigging strand will automatically block the systems at the preset angles.
Technical Data
Speaker Type
2-way Active Line Array Module
Acoustical data
Usable Bandwidth
67-20,000 Hz
Frequency Response
78-18,100 Hz
Max SPL
135 dB
HF
1×1.4″
Voice Coil HF
3″
Type HF
Neodymium, Titanium Diaphragm
LF
2×10″
Voice Coil LF
2.5″
Type LF
Neodymium Aluminium Phase Plug
Horizontal Directivity
100°
Vertical Directivity
depends on array size and configuration
Amplifier
Amp Technology
Digipro G3
Amp Class
Class-D
Power RMS
900 W
Peak Power
1800 W
Cooling
Convection
Power Supply
900 W SMPS with Auto-range PSU
Processor
Controller
DSP 56 bit
AD/DA Converter
24 bit/48 KHz
Limiter
Dual Active Multiband Peak, RMS, Thermal
Processing (filters)
FIR Linear Phase
Crossover Frequency LF-HF
950 Hz
Slope LF-HF
24 dB/Octave
Input
Signal Input
1xXLR fem, Bal.
Signal Output
1xXLR male, Bal.
Network
RDNet remote control RJ45 connector IN/OUT
Power Socket
1xPowerCon TRUE1 IN
1xPowerCon TRUE1 Out
Controls
1xSpeakers Coupling (7 presets)
1x HF Compensation (8 presets)
1XInput Attenuation Rotary Switch
Mechanics
Housing
Multiplex Plywood
Polyurea painted
Housing Design
Trapezoidal 10°
Handles
2x side
Rain Cover
Included
Rigging Points
Integrated rigging hardware
Width
720 mm (28.35 in)
Height
320 mm (12.6 in)
Depth
520 mm (20.47 in)
Weight
28.6 Kg (63.00 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Sale
DDJ-SP1 Add-on controller for Serato DJ
DDJ-SP1 Add-on controller for Serato DJ Sale
DDJ-SP1 Add-on controller for Serato DJ
DDJ-SP1 Add-on controller for Serato DJMain Features
USB Bus Powered |
Yes |
|---|---|
Plug and Play |
Yes |
Included DJ Software |
Serato Video |
Software System Requirements |
Windows 7
Mac OS X 10.8.4/10.7.5/10.6.8
Display resolution For more information click here |
Software Video Capability |
Yes |
Specifications
Width |
328 mm |
|---|---|
Height |
47.4 mm |
Depth |
178.7 mm |
Weight |
1.4 kg |
Performance Control
Channels |
4 |
|---|---|
Deck Control |
4 |
Filter |
Sound Colour filters on each channel |
Serato DJ FX powered by iZotope |
Yes |
Hot Cues |
8 |
Manual Loop |
Yes |
Autoloop |
Yes |
Slip Mode |
Yes |
Needle Search |
Yes |
Terminals
USB |
1 USB B port |
|---|
Sale
C15-400B
C15-400B Sale
C15-400B
C15-400BFeatures:
- 3” Voice Coil
- 1600 Watts Peak Power Handling
- Active Balanced Cooling
- Ferrite Magnetics
- Precision Inside/Outside Coil Geometry
- Die Cast Aluminum Chassis
Applications:
The P Audio C15-400B is a high performance wide bandwidth transducer. The C15-400B is an upgraded design that features many of P Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-400B has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 55Hz to 2000Hz. The C15-400B features a large 3 inch (75.7mm) diameter voice coil that provides an AES rated 400 watts of continuous power handling and a full 1600 watts of peak rated power handling when sufficient amplifier headroom is available. The C15-400B utilizes P Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio’s inside/ outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
Sale
NEUTRIK XLR MALE Mic Cable Conector NC3 MXX
NEUTRIK XLR MALE Mic Cable Conector NC3 MXX Sale
NEUTRIK XLR MALE Mic Cable Conector NC3 MXX
NEUTRIK XLR MALE Mic Cable Conector NC3 MXXProduct
Title
NC3MXX-14-D
Electrical
Capacitance between contacts
≤ 4 pF
Contact resistance
≤ 3 mΩ
Dielectric strength
1,5 kVdc
Insulation resistance
> 10 GΩ (initial)
Rated current per contact
16 A
Rated voltage
< 50 V
Mechanical
Cable O.D.
8 mm – 10 mm
Insertion force
≤ 20 N
Withdrawal force
≤ 20 N
Lifetime
> 1000 mating cycles
Wiresize
max. 2.5 mm²
Wiresize
max. 14 AWG
Environmental
Standard compliance
IEC 61076-2-103
Temperature range
-30 °C to +80 °C
Sale
XH-DJ006 Heavy Duty Lifting Stand
XH-DJ006 Heavy Duty Lifting Stand Sale
B15
B15
B15
B15Technical data
| Drivers | 1 × 15″ |
| Frequency range | 40 Hz – 1500 Hz |
| Power capacity program / peak | 1200 / 2400 W |
| Impedance | 4 Ω (2,5 Ω in passive mode with M8 at highpass output) |
| Coverage | omni |
| Sensitivity 1 W / 1 m | 94 dB |
| SPLmax / 1 m | 127 dB |
| Connection | NL4 2± (bi-amp) NL4 1± (passive) |
| Dimensions (H × W × D) | 506 × 440 × 560 mm [19.92 × 17.32 × 22.05 in] |
| Weight | 22.1 kg 24.2 kg with passive crossover [49 lbs] |
| Finish | Warnex texture paint |
| Accessories | FDB15, CoverB15 |
| Options | PWB15 internal passive crossover with biamped-passive switch, switchable highpass output for 8 Ω satellite speaker, RAL colors |
Sale
HDJ-X5 DJ headphones
HDJ-X5 DJ headphones Sale
HDJ-X5 DJ headphones
HDJ-X5 DJ headphonesMain Features
Type |
Closed, dynamic |
|---|---|
Driver Units |
40 mm dome type |
Cord |
1.2 m short coiled cable (1.8 m extended length) |
What’s in the box |
|
Specifications
Weight (without cord) |
269 g |
|---|---|
Maximum Input Power |
2000 mW |
Output Sound Level |
102 dB |
Frequency Range |
5 – 30000 Hz |
Impedance |
32 Ω |
Sale
7159 Zinc Plated Handle
7159 Zinc Plated Handle Sale
Sale
Groundaudio TBX 15 Speaker
Groundaudio TBX 15 Speaker Sale
Sale
MIXX 16 Digital Live Sound Mixer
MIXX 16 Digital Live Sound Mixer Sale
MIXX 16 Digital Live Sound Mixer
MIXX 16 Digital Live Sound MixerDETAILS
MIIXX16 Digital Mixer is a 16 input and 8 output digital wireless control mixer, is a new mixer through the tablet computer application control, can support all Apple iOS tablet, Windows 8 tablet. Using Wi-Fi to connect, anywhere in the wireless network within the scope of control. With 16 channels of broadcast quality microphone amplifier (including 4 modular jack), 2 main output, 6 auxiliary output. Adopt high performance 40 bit floating-point digital signal processor, 24 bit AD/DA converter. Built-in effects processor, compression and limiter, threshold, parametric equalizer… Wireless control mode makes you can walk between the on the stage and the crowd. It is 16-channel digital field mixer that with the iPad tablet computer perfect touch on the scene.
Functions:
● Intuitive touch control, covering almost all the major mixing functions.
● The mixer interface can be adjusted for each channel control, including solo, mute, audio-visual, fader,
you can see the full level meter.
● Channel interface control powerful DSP effects, including 4-band input channels PEQ, High-pass filter, compressor, gate primary and secondary channels, including 31-band graphic EQ, Limiter, effects channel including reverb and delay.
● Each channel can edit their own names and icons for easy identification, the icon can be imported from a picture library.
● + 48V phantom power on each channel can be individually switch.
● Very low noise, high dynamic design.
●6 auxiliary output can be used to monitor the mix.
●Shared global reverb and delay effects.
●Seamless access, you can adjust the sound target domain any location, you can also go directly on the stage to adjust respective monitoring, access control allows the players on stage have the ability to adjust their own monitoring.
Technical index:
Sample Rate:24bit,48kHz
Frequency Respond: 20 Hz to 20 kHz +0/–1 dB
System Delay:1.5 ms
T.H.D. :<0.005%
Noise-Mic input to main output:-72 dBv Single channel-Max fader(A weighted)
-90dBv Single channel-Min fader（A weighted）
Input crosstalk (adjacent channel):<–120 dB @1 kHz
S/N:93dB Single channel-Max fader(A weighted)
Dynamic Range:110dB Single channel-Max fader(A weighted)
CMR:>70 dB @1 kHz
Input Impedance:30 kΩ（1/4″）
Gain:0 to 60 dB （XLR）;–20 to 40 dB （1/4″）
Output Impedance: 600Ω（XLR Balance）
Max Output Level:+21 dBu（XLR Balance）
Power Supply:DC 12V-15V （3.5A）
Dimension(mm):359（L） x 85.5（H） x 411（D）
Weight:Approximately 4.2kg
Sale
OPERA UNICA 15 Active Speaker
OPERA UNICA 15 Active Speaker Sale
Sale
DJM-900 NXS 2
DJM-900 NXS 2 Sale
DJM-900 NXS 2
DJM-900 NXS 2Main Features
MIDI Control |
Full assignable MIDI controls |
|---|---|
ProDJ Link |
Yes |
P-LOCK Fader Caps |
Yes |
Auto Standby |
Yes |
DVS Control |
|
Specifications
Width |
333 mm |
|---|---|
Height |
107.9 mm |
Depth |
414.2 mm |
Weight |
8 kg |
Frequency Range |
20 – 40000 Hz |
Sampling Rate |
96 kHz |
A/D Converter |
24 bit |
D/A Converter |
32 bit |
S/N Ratio Line |
105 dB |
S/N Ratio Phono |
88 dB |
S/N Ratio Mic |
79 dB |
Distortion |
< 0.005 % (LINE) |
Power Consumption |
42 W |
Channels
EQ/ISO |
3 band |
|---|---|
EQ/ISO Range |
Built-in, switchable 3-band equaliser: -26 dB ~ +6 dB / 3-band isolator: -∞ ~ +6 dB |
Performance Control
Channels |
4 |
|---|---|
Sound Color FX |
|
Beat FX |
|
FX Frequency |
Yes |
|---|---|
X-PAD |
Yes |
rekordbox Quantize |
Yes |
Crossfader
Crossfader Type |
Magvel Fader |
|---|---|
CURVE Assignable |
Yes |
Fader Curve |
3 |
Mic
Mic Connection |
|
|---|---|
Talkover |
3 Position Switch |
Talkover Attenuator |
Terminals
Inputs |
|
|---|---|
Send/Return |
|
LAN |
1 |
USB |
|
Outputs |
|
Special Offers
Commodo sociosqu venenatis cras dolor sagittis integer luctus sem primis eget maecenas sed urna malesuada consectetuer
Sale
Groundaudio DM-18K 9000W X 2 @ 2 Ohms Amplifier
Groundaudio DM-18K 9000W X 2 @ 2 Ohms Amplifier Sale
Groundaudio DM-18K 9000W X 2 @ 2 Ohms Amplifier
Groundaudio DM-18K 9000W X 2 @ 2 Ohms AmplifierDETAILS
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce posuere metus vitae arcu imperdiet, id aliquet ante scelerisque. Sed sit amet sem vitae urna fringilla tempus. Maecenas suscipit dui nec nisl laoreet eleifend. Cras ex quam, ullamcorper sit amet accumsan nec, commodo ut lorem. Donec mollis tellus nisl, non rhoncus neque tristique non. Cras nec vehicula mi, at venenatis massa.
Product_Name Series
Features
- Feature1
- Feature2
- Feature3
Applications
- Application1
- Application2
- Application3
TECHNICAL DATA
Technical Specifications
Input Impedance : 10K
Cross Talk : <-80K
Sale
POWER AMPLIFIER PM3602
POWER AMPLIFIER PM3602 Sale
POWER AMPLIFIER PM3602
POWER AMPLIFIER PM3602DETAILS
- Lorem ipsum dolor sit amet, an elitr feugait patrioque has. Ex pertinax consulatu duo, verear suscipit et has, in augue intellegebat sea.
- Lorem ipsum dolor sit amet, an elitr feugait patrioque has. Ex pertinax consulatu duo, verear suscipit et has, in augue intellegebat sea
- Lorem ipsum dolor sit amet, an elitr feugait patrioque has. Ex pertinax consulatu duo, verear suscipit et has, in augue intellegebat sea
- Lorem ipsum dolor sit amet, an elitr feugait patrioque has. Ex pertinax consulatu duo, verear suscipit et has, in augue intellegebat sea
TECHNICAL DATA
<Product Name> Spec
Input Impedance : 10K
Cross Talk : <-80K
Sale
POWERSOFT K10 2-Channel (Made In Italy)
POWERSOFT K10 2-Channel (Made In Italy) Sale
POWERSOFT K10 2-Channel (Made In Italy)
POWERSOFT K10 2-Channel (Made In Italy)DETAILS
OVERVIEW CHART
The K10 is nothing short of power with 12,000 W from a single rack space chassis. Capable of driving subwoofers and large-scale FOH systems equally well, numerous touring sound reinforcement systems are built around racks exclusively utilizing K10′s for all frequency bands, benefitting greatly from maximum flexibility. Operation with 2Ω loads is not only safely possible but recommended, reducing the number of amplifiers required in a system.
In use worldwide by leading touring and event sound companies, K Series is preferred among the top ranking system designers, sound engineers, and system techs on the road for making their lives easier, giving them reliable premier-grade power and headroom in the smallest possible package size.
Fully digitally controlled and with a serial PC communication port as standard, the K10 is also available with KDSP board and KAESOP Ethernet/AES3 interface: the K10 DSP+AESOP amounts to a fully integrated, highly sophisticated yet easy to use power source including state-of-the-art sound shaping and system management capabilities, remotely controllable via Powersoft’s Armonía Pro Audio Suite™ (Interface available for MediaMatrix, Crestron, AMX, Q-SYS control and monitoring systems).
Power supply
- Advanced switch-mode worldwide operating power supply technology for high performance and compact size
- Power Factor Correction PFC for extremely low mains consumption and extremely wide mains operating range
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Protections
Fully protected circuit design with:
- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term rms (non audio) signals reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continous variable speed fan, front to back airflow
- Temperature forecast with LCD traced historical behaviour
General
- Fixed frequency switchmode output stage for high grade sound accuracy
- Compact size – all models only 1 RU for reduced rack cost and space
- Light weight – for easier racking and shipping: 12 kg (26.5 lbs) according to configuration
- Combo XLR/6.3mm jack Neutrik input connectors with link capability
- AES3 digital input*
Settings
- LCD matrix interactive display
- Comprehensive-user friendly front panel display menu
- Built-in defeatable clip limiters for each channel
- Digital gain-attenuator control
- Defeatable gate selection for each channel
- User selectable gain/sensitivity
- User selectable maximum output power for each channel
- User selectable maximum mains current draw
- Lockable set-up by user selectable access key code
- Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring
Monitoring
- Hardware monitor available for fast local diagnostic
- Load impedance measurement / display for each channel
- Output power measurements / display for each channel
- Mains voltage and current measurements / display
- Downloadable log file of functional fault events with time related trace
- Smart Card settings, parameters and upgrades functionality
Digital Signal Processing*
- Analog Devices SHARC® DSP architecture
- AD/DA converter: dual 24bit @ 96 kHz Tandem® architecture, 127 dB dynamic range, per channel
- Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
- Delay up to 1 s for time alignment
- Active DampingControl™ for cable compensation
- Power limiter (TruePower™, RMS voltage, RMS current) + Peak Limiter
Remote management*
- Control and monitoring through Armonía Pro Audio Suite™
- Interface available for MediaMatrix, Crestron, AMXcontrol, Q-SYS and monitoring systems
* = DSP+AESOP version
TECHNICAL DATA
| General | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of channels | 2 | ||||||||||||||||||||||||||||
| Output power | Single channel mode | Bridge mode | |||||||||||||||||||||||||||
| 2 Ω | 4 Ω | 8 Ω | 4 Ω | 8 Ω | |||||||||||||||||||||||||
| 6000 W | 4000 W | 2000 W | 12000W | 8000W | |||||||||||||||||||||||||
| Max output voltage / current | 200 Vpeak / 125 Apeak | 400 Vpeak | |||||||||||||||||||||||||||
| AC Main Power | |||||||||||||||||||||||||||||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||||||||||||||||||||||||||||
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||||||||||||||||||||||||||||
| Operating voltage | 90 V – 264 V | ||||||||||||||||||||||||||||
| Power consuption** | 115 V | 230 V | |||||||||||||||||||||||||||
| Idle | 91 W | 1.3 A | 84 W | 1.17 A | |||||||||||||||||||||||||
| 1/8 of max output power @ 4 Ω | 1250 W | 12.2 A | 1250 W | 6.1 A | |||||||||||||||||||||||||
| 1/4 of max output power @ 4 Ω | 2500 W | 22.6 A | 2500 W | 11.3 A | |||||||||||||||||||||||||
| Thermal | |||||||||||||||||||||||||||||
| Operating temperature range | 0° – 45° C – 32° – 113° F | ||||||||||||||||||||||||||||
| Thermal dissipation** | 115 V | 230 V | |||||||||||||||||||||||||||
| Idle | 546 BTU/h | 137.6 kcal/h | 546 BTU/h | 137.6 kcal/h | |||||||||||||||||||||||||
| 1/8 of max output power @ 4 Ω | 1244 BTU/h | 313.5 kcal/h | 1244 BTU/h | 313.5 kcal/h | |||||||||||||||||||||||||
| 1/4 of max output power @ 4 Ω | 1943 BTU/h | 489.6 kcal/h | 1943 BTU/h | 489.6 kcal/h | |||||||||||||||||||||||||
| AUDIO | |||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
| Frequency response | 20 Hz – 20 kHz (±0.5 dB) @ 1 W, 8 Ω | ||||||||||||||||||||||||||||
| S/N ratio | > 110 dB (20 Hz – 20 kHz, A weighted) | ||||||||||||||||||||||||||||
| Crosstalk separation | > 66 dB @ 1kHz | ||||||||||||||||||||||||||||
| THD+N | < 0.5% from 1 W to full power (typically < 0.05%) | ||||||||||||||||||||||||||||
| IMD | < 0.5% from 1 W to full power (typically < 0.05%) | ||||||||||||||||||||||||||||
| Input impedance | 10 kΩ balanced | ||||||||||||||||||||||||||||
| Slew rate | 50 V/μs @ 8Ω, input filter bypassed | ||||||||||||||||||||||||||||
| Damping factor | > 5000 @ 20-200 Hz | ||||||||||||||||||||||||||||
| DSP | |||||||||||||||||||||||||||||
| DSP architecture | Analog Devices SHARC® DSP | ||||||||||||||||||||||||||||
| AD Converter | Dual 24 bit 96 kHz Tandem® architecture with 127 dBA of dynamic range and THD | ||||||||||||||||||||||||||||
| DA Converter | Dual 24 bit 96 kHz Tandem® architecture with 122 dBA of dynamic range and THD | ||||||||||||||||||||||||||||
| Internal precision | 40 bit floating point | ||||||||||||||||||||||||||||
| Firmware | Network upgradable firmware | ||||||||||||||||||||||||||||
| Memory/presets | 8 MB (RAM) plus 2 MB flash for presets / 50 stored locally + 150 stored on Smart Card | ||||||||||||||||||||||||||||
| Latency | 6.0 ms fixed latency architecture | ||||||||||||||||||||||||||||
| Input equalizer | Three layers (PEQ, raised cosine, shelving), 32 filters each + group filters, up to 256 filters total | ||||||||||||||||||||||||||||
| Output equalizer | 16 fully parametric filters per channel, IIR: peaking, hi/lo-shelving, hi/lo-pass, band-pass, band-stop, all-pass. Custom FIR up to 384 taps @ 48 or 96 kHz | ||||||||||||||||||||||||||||
| Crossover | Butterworth, Linkwitz-Riley, Bessel or arbitrary asimmetric: 6 dB/oct to 48 dB/oct (IIR), linear phase (FIR), hybrid (FIR-IIR) | ||||||||||||||||||||||||||||
| Delay | up to 4 s on input section; up to 32 ms per output, sample-by-sample stepping | ||||||||||||||||||||||||||||
| Limiters | Power limiter, TruePower™, RMS voltage, RMS current + Peak limiter | ||||||||||||||||||||||||||||
| Damping control | Active DampingControl™ | ||||||||||||||||||||||||||||
| Front panel | |||||||||||||||||||||||||||||
| Indicators and Controllers | 2 x LED bar – Signal level and over-temperature protection 4 x Push-button – Setting operating parameters 1 x Display – Settings and monitoring 1 x Power switch – |
||||||||||||||||||||||||||||
| Connectors | |||||||||||||||||||||||||||||
| AC main | 1 x AMP CPC 45A connector – 45 A max (region-specific power cord provided) | ||||||||||||||||||||||||||||
| Audio signal input | 2 x Combo Jack/XLR-F – Signal input 1 x Analog/Digital input – Switchable Analog line/AES3 digital input on channel 2 |
||||||||||||||||||||||||||||
| Auxiliary voltage | 1 x 2 pin Phoenix MC 1.5/2-ST-3.81 – External voltage connector (DSP version only) | ||||||||||||||||||||||||||||
| Loudspeakers | 2 x speakON – Neutrik NL4MD | ||||||||||||||||||||||||||||
| Network/data | 2 x Rj45 socket – Ethernet + AESOP connection (DSP+AESOP version only) 2 x Rj45 socket – Ethernet + AESOP connection (DSP+AESOP version only) 1 x Rj45 socket – RS485 data connection (non-DSP version) |
||||||||||||||||||||||||||||
| Rear panel | |||||||||||||||||||||||||||||
| Indicators and Controllers | 1 x Push-button – Link channel pair 1 x Push-button – Toggle ANALOG input/AES3 input on selected connector |
||||||||||||||||||||||||||||
| Construction | |||||||||||||||||||||||||||||
| Dimensions (L x H x W) | 483 mm x 44.45 mm x 475 mm (19.0 in x 1.8 in x 18.7 in) | ||||||||||||||||||||||||||||
| Weight | 12 kg (26.5 lb) | ||||||||||||||||||||||||||||
* Data is subject to change without notice.
Sale
9R Beam 260W Moving Head
9R Beam 260W Moving Head Sale
9R Beam 260W Moving Head
9R Beam 260W Moving HeadDETAILS
260W moving head beam light
voltage: 110-240
power :
model : Japanese lamp
function ：
color wheel：14+1
Gobo：14+1
effect wheel：0
IP protection class：20
light body size：
weight：16.44
1.Lamp Color Tempreture:8400K;
2.Lamp lifespan:2000hours;
3.14 color+white;
4.14 gobo+white;
5.16facet prism+18facetprism(6+12double layer)
2 prism can over lay;
6.Weight；16.44kg
7. Colorful prism effects.
Channels mode:16CH
Lamp: Japanese lamp 260
Lamp Color Temperatrue : 8400K;
Lamp lifespan:2000hours;
Power:110-240V,50/60Hz;
Total power:430W
Display:1.7inch Screen display
Color Wheel:14colors+white
Fixed gobo:14gobo+white
Prism:16facet prism+18facet prism(6+12double layer);
Beam angel:3.8°;
Pan:540°,8Bit/16Bit;
Tilt:270°,8Bit/16Bit;
IP Rate:IP20
Product size:367.6x267x539.8mm;
Carton box:585*465*425mm;
Flycaes:810*430*710
N.W.:16.44Kg;
G.W.: 20.4KG(catron box).
Vera-Sys-Two
Vera-Sys-Two
Vera-Sys-Two
Vera-Sys-TwoDETAILS
VERA-SYS-TWO is the uncomplicated beginner system for entering the world of line arrays. The VERA-SYS-TWO comprises four VERA10 modules with integrated passive crossover, ready for transport in a VERA DL10 dolly. Added to that: two VERA S30 subs on a QDB30 dolly, two Powersoft K3 DSP amplifiers in the SYSRACK including patch panel and cables and two SF10 frames with two distance poles.
It is a complete system to get immediately started..
The integrated switchable passive crossover deserves special attention, it allows operating the VERA10 elements on just one amplifier channel.
To use VERA10 in a large array, the crossover can simply be switched over to loss-free bi-amped operating mode, which means that the VERA-SYS-TWO can be extended at any time, using additional hired equipment for big jobs or permanently make up a VERA-SYS-ONE.
Another advantage of the passive crossover is that the high frequency level can be set at 0, -3 or -6 dB, in both passive and bi-amped modes. Making it also interesting for colleagues who need additional VERA10 elements as down fill or near fill for larger sound system solutions.
And of course the 80 degree horn can – if needed – be swapped for a 120 degree horn in seconds.
Sale
Durby Light
Durby Light Sale
AVID VENUE PROFILE MIXER
AVID VENUE PROFILE MIXER
AVID VENUE PROFILE MIXER
AVID VENUE PROFILE MIXERDETAILS
PRICE IS NEGOTIABLE
AVID VENUE PROFILE FEATURES
• Small footprint: 45.3” x 31.1” x 6.65” (1150 x 790 x 169 mm) • Provides 24 input faders in a single, compact console • Fully compatible with FOH Rack, Stage Rack, and the all-in-one Mix Rack • Employs the same VENUE software as all Avid live sound systems for complete show file portability between systems (running VENUE 2.5 or higher software) • Eight output faders, plus eight rotary output encoders, provide control of all group masters and/or plug-ins • Dedicated dynamics and EQ encoders offer control of both onboard dynamics and EQs as well as plug-ins • Features eight fully assignable function buttons for flexible control and programming • Eight GPI inputs and eight GPI outputs allow Profile to send or respond to equipment via simple switch closures
TECHNICAL DATA
AVID VENUE PROFILE SPECIFICATIONS
Maximum Height (front) • 3.2 inches (81 mm) Maximum Height (rear) • 6.8 inches (169 mm) Maximum Width • 45.21 inches (1150 mm) Maximum Depth • 31.11 inches (790 mm) Weight • 90 lbs (40.8 kg) Power Requirements • 100–240 VAC, 50–60 Hz, 160 W USB Ports (3) • USB 1.1 VGA Port • DB-15 mini-female (1024 x 768 resolution) Footswitch Connectors (2) • 1/4-inch TRS GPI In Port • DB-25 D-Sub, female GPI Out Port • DB-25 D-Sub, male Console Light Connectors (2) • XLR FOH Link Connector (to FOH Rack or Mix Rack) • MIL connector Max FOH Link Cable Length • 11 ft (3.35 m)
RCF SYSTEM TTL 55 A & TTS 56-A
RCF SYSTEM TTL 55 A & TTS 56-A
RCF SYSTEM TTL 55 A & TTS 56-A
RCF SYSTEM TTL 55 A & TTS 56-ADETAILS
PRICES ARE NEGOTIABLE
TTL 55-A
ACTIVE THREE-WAY LINE ARRAY MODULE ( 16 Pieces)
- Tour grade cabinet and mechanics
- 3500 Watt, 4 way amplification
- 6 x high power neodymium transducers
- High quality analog input board
- 96 kHz, 32 bit DSP processing
- Remote monitoring and control
- Maximum output per size on the market
- RDNet on board
The TTL55-A is a high power, three way, active line array module engineered to deliver an incredible output for use in indoor or outdoor large spaces. The system is designed to be easily scalable from few modules for medium and small theatres to full size arrays for very large outdoor stadia and public spaces. The three new designs for the six neodymium transducers that power the system represent the result of many years dedicated in pioneering new solutions using the best materials available on the market. The integration of the 3500 W four channel digital amplification and the advanced digital processing set a new standard for distortion, noise and thermal efficiency.
- RDNet
- TTS 56-AACTIVE HIGH POWER SUBWOOFER (12 Pieces)
FEATURES
- 2 x 3400 W digital amplifiers
- 2 x 21″ high power neodymium woofers
- 96 kHz, 32 bit DSP processing
- Remote monitoring and control
- Time delay alignment
- Cardioid preset for groups
- Tour grade cabinet
- RDNet on board
- Maximum output per size on market
- The TTS56-A is a high power, high output active subwoofer system that sets a new standard in the touring sound reinforcement.
The new 21″ neodymium design represents the result of many years dedicated in pioneering new solutions for the transducers technology. The integration of the 6800 W, two channel digital amplification and the advanced digital processing set a new standard for distortion, noise and thermal efficiency.
TECHNICAL DATA
TTL 55-A
ACTIVE THREE-WAY LINE ARRAY MODULE
SPECIFICATIONS
Acoustical specifications
FREQUENCY RESPONSE:
50 Hz ÷ 20000 Hz
MAX SPL @ 1M:
143 dB
HORIZONTAL COVERAGE ANGLE:
90°
VERTICAL COVERAGE ANGLE:
7°
Transducers
COMPRESSION DRIVER:
3 x 1.5” neo, 2.5” v.c
MIDRANGE:
10” neo, 3.5” v.c
WOOFER:
2 x 12” neo, 4.0” v.c
Input/Output section
INPUT SIGNAL:
bal/unbal
INPUT CONNECTORS:
XLR, RDNet Ethercon
OUTPUT CONNECTORS:
XLR, RDNet Ethercon
INPUT SENSITIVITY:
+4 dBu
Processor section
CROSSOVER FREQUENCIES:
320 Hz – 1300 Hz
PROTECTIONS:
Thermal, Excurs., RMS
LIMITER:
Soft Limiter
CONTROLS:
DSP controlled
RDNET:
Yes
Power section
TOTAL POWER:
7000 W Peak, 3500 W RMS
HIGH FREQUENCIES:
1000 W Peak, 500 W RMS
MID FREQUENCIES:
2000 W Peak, 1000 W RMS
LOW FREQUENCIES:
4000 W Peak, 2000 W RMS
COOLING:
Convection/Forced
CONNECTIONS:
Powercon IN/OUT
Standard compliance
CE MARKING:
Yes
Physical specifications
CABINET/CASE MATERIAL:
Baltic birch plywood
HARDWARE:
Array Fly – Ware
HANDLES:
2 Side
GRILLE:
Steel
COLOR:
Black
Size
HEIGHT:
380 mm / 14.96 inches
WIDTH:
1020 mm / 40.16 inches
DEPTH:
550 mm / 21.65 inches
WEIGHT:
70.5 kg / 155.43 lbs
TTS 56-A
ACTIVE HIGH POWER SUBWOOFER
SPECIFICATIONS
Acoustical specifications
FREQUENCY RESPONSE:
30 Hz ÷ 100 Hz
MAX SPL @ 1M:
145 dB
Transducers
WOOFER:
2 x 21” neo, 4.5” v.c
Input/Output section
INPUT SIGNAL:
bal/unbal
INPUT CONNECTORS:
XLR, RDNet Ethercon
OUTPUT CONNECTORS:
XLR, RDNet Ethercon
INPUT SENSITIVITY:
-2 dBu/+10 dBu
Processor section
HI-PASS FREQUENCIES:
90 Hz
LOW-PASS FREQUENCIES:
60 Hz
PROTECTIONS:
Thermal, Excurs., RMS
LIMITER:
Soft Limiter
CONTROLS:
DSP Controlled
RDNET:
Yes
Power section
TOTAL POWER:
13600 W Peak, 6800 W RMS
LOW FREQUENCIES:
13600 W Peak, 6800 W RMS
COOLING:
Convection/Forced
CONNECTIONS:
Powercon IN/OUT
Standard compliance
CE MARKING:
Yes
Physical specifications
CABINET/CASE MATERIAL:
Baltic birch plywood
HARDWARE:
2 x steel bar fork – lift transportation, 4 x 100 mm wheels
HANDLES:
6 side
GRILLE:
Steel
COLOR:
Black
Size
HEIGHT:
590 mm / 23.23 inches
WIDTH:
1170 mm / 46.06 inches
DEPTH:
988 mm / 38.9 inches
WEIGHT:
122.8 kg / 270.73 lbs
Sale
MIXX 16 Digital Live Sound Mixer
MIXX 16 Digital Live Sound Mixer Sale
MIXX 16 Digital Live Sound Mixer
MIXX 16 Digital Live Sound MixerDETAILS
MIIXX16 Digital Mixer is a 16 input and 8 output digital wireless control mixer, is a new mixer through the tablet computer application control, can support all Apple iOS tablet, Windows 8 tablet. Using Wi-Fi to connect, anywhere in the wireless network within the scope of control. With 16 channels of broadcast quality microphone amplifier (including 4 modular jack), 2 main output, 6 auxiliary output. Adopt high performance 40 bit floating-point digital signal processor, 24 bit AD/DA converter. Built-in effects processor, compression and limiter, threshold, parametric equalizer… Wireless control mode makes you can walk between the on the stage and the crowd. It is 16-channel digital field mixer that with the iPad tablet computer perfect touch on the scene.
Functions:
● Intuitive touch control, covering almost all the major mixing functions.
● The mixer interface can be adjusted for each channel control, including solo, mute, audio-visual, fader,
you can see the full level meter.
● Channel interface control powerful DSP effects, including 4-band input channels PEQ, High-pass filter, compressor, gate primary and secondary channels, including 31-band graphic EQ, Limiter, effects channel including reverb and delay.
● Each channel can edit their own names and icons for easy identification, the icon can be imported from a picture library.
● + 48V phantom power on each channel can be individually switch.
● Very low noise, high dynamic design.
●6 auxiliary output can be used to monitor the mix.
●Shared global reverb and delay effects.
●Seamless access, you can adjust the sound target domain any location, you can also go directly on the stage to adjust respective monitoring, access control allows the players on stage have the ability to adjust their own monitoring.
Technical index:
Sample Rate:24bit,48kHz
Frequency Respond: 20 Hz to 20 kHz +0/–1 dB
System Delay:1.5 ms
T.H.D. :<0.005%
Noise-Mic input to main output:-72 dBv Single channel-Max fader(A weighted)
-90dBv Single channel-Min fader（A weighted）
Input crosstalk (adjacent channel):<–120 dB @1 kHz
S/N:93dB Single channel-Max fader(A weighted)
Dynamic Range:110dB Single channel-Max fader(A weighted)
CMR:>70 dB @1 kHz
Input Impedance:30 kΩ（1/4″）
Gain:0 to 60 dB （XLR）;–20 to 40 dB （1/4″）
Output Impedance: 600Ω（XLR Balance）
Max Output Level:+21 dBu（XLR Balance）
Power Supply:DC 12V-15V （3.5A）
Dimension(mm):359（L） x 85.5（H） x 411（D）
Weight:Approximately 4.2kg
Sale
Hill Audio LMR 2442 FXC Audio Mixer
Hill Audio LMR 2442 FXC Audio Mixer Sale
Hill Audio LMR 2442 FXC Audio Mixer
Hill Audio LMR 2442 FXC Audio MixerDETAILS
The Hill Audio Multimix LMR-2442-FXC-USB is a 19’’-rackable live mixing desk comprising everything required for medium-sized events. One-knob compressors in the 8 mic/line inputs make dynamics management easy, and the 3-band EQs with semi-parametric mids allow precise tonal adjustments. 4 stereo input channels provide connections for a variety of other sources, two of these also fitted with 3.5mm TRS inputs in case the desk needs to be temporarily converted to a DJ console. 4 subgroups grant a structured approach to the mixdown. 4 AUX busses are available, two of them pre/post-fader switchable for either effects or monitoring purposes, and two post-fader routed for effects purposes. One of the post-fader AUX busses is routed to the sophisticated internal effects processor which features a larger LCD clear text display and up to 3 editable parameters per algorithm. The comprehensive monitoring and solo facilities help to make the operation transparent and intuitive. A USB audio interface for basic stereo replay and recording completes this comprehensive mixer concept, making the LMR-2442-FXC-USB a true descendant of the original Multimix range.
- 8 mono mic/line inputs with gain control, one-knob compressor, 75Hz highpass filter, 4-band semiparametric EQ, 4 AUX busses, pan control and peak LED
- 2 mono Mic/stereo Line inputs with gain control, 4-band shelving EQ, balance control and peak LED
- 2 stereo Line inputs with gain control, 4-band shelving EQ, balance control and peak LED
- 5mm TRS stereo inputs in 2 stereo channels
- 60mm faders for level control in all channels
- All mic channels with insert jack
- Channels assignable to Master (LR) or subgroup pair 1+2 or subgroup pair 3+4
- 4 Subgroups with external outputs, assignable to Master L or R, 60mm fader per subgroup
- Switchable +48V phantom power for microphone inputs
- Two AUX busses fixed post-fader (one assigned to internal effects), two AUX busses switchable pre/post
- Post-fader AUX returns re-routable to Monitor AUX send
- TriCore DSP 24-Bit stereo effects processor with LCD display, external output and footswitch control. 15 algorithms in 6 groups, editable in up to 3 parameters per algorithm. Tap tempo function.
- Tape record/playback with flexible routing
- USB stereo soundcard for replay and recording
- Control Room/headphones output with selectable source
- Master with 60mm fader and 2×15 LED meter
- SOLO for channels and AUX send, PFL/AFL
- Internal switch mode power supply
- Full metal case with detachable plastic side panels and mountable metal rack ears (included)
- CE/ROHS compliant
TECHNICAL DETAILS
- Frequency response (MIC IN @ -20 dB) | Mic In to Main Out (Trim at 0 dB): 10Hz – 22kHz +0 -1dB
- THD (MIC IN @ -20 dB) | Mic In-Main Out, 20Hz-20kHz: (Trim at 0 dB, Main output at 0 dB): 0.007%
- Signal-to-noise ratio | Mic In to Main Out (Trim at 0 dB): >85dB
- Preamp Noise (EIN) | 20 Hz to 20 kHz, (150Ω source): -114 dB
- Residual Output Noise | All level controls @ minimum: ＜-88dB
- Common Mode Rejection Ratio (CMRR) | Maximum Gain: >50dB @ 1kHz
- Crosstalk | Adjacent channels/ Same channel (stereo separation): -65dB/-40dB
- AC supply 100-250V~ 50Hz-60Hz (35W)
- Dimension 443.0×412.0×103.0 mm WxHxD
- Weight 7.05 kg
Sale
2326 Zinc Plated Handle
2326 Zinc Plated Handle Sale
2326 Zinc Plated Handle
2326 Zinc Plated HandleItem: Surface Mount spring-loaded handle. Moldeed grip.
Material: steel
Size: 140*82mm
Finish: zinc, nickel
Sale
2003 Cymbal Case
2003 Cymbal Case Sale
2003 Cymbal Case
2003 Cymbal CaseDETAILS
Product Description：
NW:1.98KG
GW:1.98KG
Exterior size:565*490*60 (mm)
Interior size:465*465*50 (mm)
Material:High Strength PP