VIO S118R F 1 X 18″ Bass Reflex VIO S118R F 1 X 18″ Bass Reflex
Rs.436,800.00 Rs.414,960.00
Technical Data
Speaker Type – Active Bass Reflex Subwoofer
Acoustical data
Frequency Response – 35 Hz to Cut Freq (X-Over Dependent)
Frequency Response – 32 Hz
Max SPL – 139 dB
LF – 1×18″
Voice Coil LF – 4 ”
Directivity – Omnidirectional
Amplifier
Amp Technology – Digipro® G4
Amp Class – Class D
RMS Power – 1600 W
Peak Power – 3200 W
Cooling – Convection + Internal Fan
Power Supply – Full-range PSU with PFC
Processor
Controller – DSP 32 Bit
AD/DA Converter – 24 bit 96 kHz
Limiter – RMS, Peak, Thermal
Delay Option – 0- 9.9 ms | steps of 0.1 ms
0 – 62 ms
Crossover Frequency LF-HF – Selectable 60-110Hz + Full range
LF-Xover out slope – 24 dB/Octave
Input
Signal Input – 1xXLR balanced
Signal Output – 1x XLR balanced (link or X-over)
1xRJ45 LINK (RDNet)
Expansion Card – RDNet Card (1x RJ45 IN 1x RJ45 Link)
Dante card
Mains Connections – 1x PowerCON TRUE1 In
1x PowerCON TRUE1 Out
Controls – 1x Input Attenuation Rotary Switch
1x Rotary Encoder (Delay 9.9 ms)
1x Polarity Inversion Switch (0° or 180°)
1x Cardioid Mode Switch
1x X-Over Freq Switch (60-110 Hz + Full Range
1x System Auto-test
Mechanics
Housing – Multiplex plywood
Polyurea painted
Handles – 2x Per Side
Aluminium
Pole Mount – M20 Thread
Raincover – Included
Width – 720 mm (28.34 in)
Height – 520 mm (20.47 in)
Depth – 695 mm (27.36 in)
Weight – 47 kg (103.62 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Description
The system’s acoustic engine is driven by a Digipro G4® 1600W Class D amplifier, equipped with PFC (Power Factor Correction) and SMPS which make the cabinet highly resistant to line voltage fluctuations. Digipro G4 preamplifier features a slot module, equipped with a RDNet expansion card as default, allowing system monitoring and control via Aurora Net. Furthermore, the system is ready for Audinate Dante™ Expansion Card allowing integration in a digital audio network.The amplifier also allows users to run a real-time test on electronics and transducers, both remotely via Aurora Net, or directly on the amplifier module. VIO S118R shows an on-board delay module, allowing to reach a max 62 ms delay via Aurora Net and a max 9.9 ms delay with 0.1 ms steps via on-board rotary. The on-board cardioid preset processes the backward sub in inverted stack cardioid configurations, to achieve the best possible cancellation on the rear side automatically.
