15MB1000 8Ω LF drivers – 15.0 Inches
15MB1000 8Ω LF drivers – 15.0 Inches15MB1000 8Ω LF drivers – 15.0 Inches
15MB1000 8Ω LF drivers – 15.0 Inches98 dB SPL 1W / 1m average sensitivity
100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
850 W AES power handling
Carbon fiber reinforced cellulose cone
Copper shorting ring for linear impedance and reduced distortion figure
Double Demodulating Ring (DDR) for lower distortion
Improved heat dissipation via unique basket design
Weather protected cone and plates for outdoor usage
Ideal for compact reflex enclosures, two-way systems and stage monitoring applications
18LW2400 8Ω LF drivers – 18.0 Inches
18LW2400 8Ω LF drivers – 18.0 Inches18LW2400 8Ω LF drivers – 18.0 Inches
18LW2400 8Ω LF drivers – 18.0 Inches98 dB SPL 1W / 1m average sensitivity 100 mm (4 in) Interleaved Sandwich Voice coil (ISV) 2400 W program power handling Fiberglass reinforced cone Double Silicon Spider (DSS) for superior excursion control and linearity Double Demodulating Rings (DDR) for lower distortion Improved heat dissipation via multi-cell air diffractor and multiple backplate vents Weather protected cone and plates for outdoor usage Ideal for high SPL subwoofer designs
B & C 12TBX 100 Speaker ( Made In Italy )
B & C 12TBX 100 Speaker ( Made In Italy )B & C 12TBX 100 Speaker ( Made In Italy )
B & C 12TBX 100 Speaker ( Made In Italy )DETAILS
KEY FEATURES
* 2000W continuous power handling.
* 64mm (2.5 in ) aluminium voice coil.
* 50-4000 Hz response.
* 101 dB sensitivity.
TECHNICAL DATA
Nominal Diameter – 320mm (12.0 in)
Nominal Impedance – 8 Ohms
Minimum Impedance – 6.3 Ohms
Power Handling
Nominal (AES)1 – 1000W
Continuous Program2 – 2000W
Sensitivity (1W/1m)3 – 95dB
Frequency Range – 45-1000 Hz
Voice coil diameter – 100mm (4 in)
Winding material – Copper
Former material – Glass Fibre
Winding Depth – 25mm (1 in )
Magnetic Gap Depth * 12 mm (1/2 in)
Flux Density – 1.1 T
Magnet Material – Ferrite Ring
Waterproof cone treatment – Both sides
B & C 18TBX 100 Speaker ( Made In Italy )
B & C 18TBX 100 Speaker ( Made In Italy )B & C 18TBX 100 Speaker ( Made In Italy )
B & C 18TBX 100 Speaker ( Made In Italy )B & C DE 85TN Tweetar
B & C DE 85TN TweetarB & C DE 85TN Tweetar
B & C DE 85TN TweetarB&C 10 NW64 8OHM
B&C 10 NW64 8OHMB&C 12 NDL76 8OHM
B&C 12 NDL76 8OHMB&C 18 TBW100 8OHM
B&C 18 TBW100 8OHMB&C 21 SW152 8OHM
B&C 21 SW152 8OHMB&C 8PE21 8OHM
B&C 8PE21 8OHMB&C DE800 8OHM
B&C DE800 8OHMC15-400B
C15-400BC15-400B
C15-400BFeatures:
- 3” Voice Coil
- 1600 Watts Peak Power Handling
- Active Balanced Cooling
- Ferrite Magnetics
- Precision Inside/Outside Coil Geometry
- Die Cast Aluminum Chassis
Applications:
The P Audio C15-400B is a high performance wide bandwidth transducer. The C15-400B is an upgraded design that features many of P Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-400B has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 55Hz to 2000Hz. The C15-400B features a large 3 inch (75.7mm) diameter voice coil that provides an AES rated 400 watts of continuous power handling and a full 1600 watts of peak rated power handling when sufficient amplifier headroom is available. The C15-400B utilizes P Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio’s inside/ outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
C15-600EL
C15-600ELC15-600EL
C15-600ELDETAILS
The P Audio C15-600EL is a high output wide bandwidth transducer. The C15-600EL is an upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-600EL has been optimized for use in two way or three way sound reinforcement systems and has a rated operating range of 55Hz to 2000Hz. The C15-600EL employs a large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The C15-600EL utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The C15-600EL also features a double spider configuration that further enhances system reliability and mechanical control. The transducer chassis is a die cast aluminum design that insures a very high degree of structural
TECHNICAL DETAILS
Features:
- 3.9” Large FormatVoice Coil
- 4800 Watts Peak Power Handling
- Active Balanced Cooling
- Ferrite Magnetics
- Precision Rectangular Ribbon Wire
- Double Spider Suspension
- Integrated Demodulation Rings
- Die Cast Aluminum Chassis
Applications:
The P Audio C15-600EL is a high output wide bandwidth transducer. The C15-600EL is an upgraded design that features many of P Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-600EL has been optimized for use in two way or three way sound reinforcement systems and has a rated operating range of 55Hz to 2000Hz. The C15-600EL employs a large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The C15-600EL utilizes P Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio’s rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The C15-600EL also features a double spider configuration that further enhances system reliability and mechanical control. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
C18-650EL
C18-650ELC18-650EL
C18-650ELFeatures:
- 3.9” Large Format Voice Coil
- 4800 Watts Peak Power Handling
- Active Balanced Cooling
- Ferrite Magnetics
- Precision Rectangular Ribbon Wire
- Double Spider Suspension
- Integrated Demodulation Rings
- Die Cast Aluminum Chassis
Applications:
The P Audio C18-650EL is a high output low frequency transducer. The C18-650EL is an upgraded design that features many of P Audio’s new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C18-650EL employs a large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The transducer is optimized for use in properly tuned vented enclosures and will provide maximal reliability when both a vented enclosure and active high pass filtering are employed. The C18-650EL utilizes P Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio’s rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design further enhances system mechanical control and reliability. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.