B15
B15B15
B15DETAILS
One size bigger, nonetheless still compact: just like the B10, our B15 is a true multi talent. Especially with the optional passive crossover PWB15. The 1 × 15″ fitted bass reflex system is suitable for the switchable bi-amp mode together with our M and C series loudspeakers, or as a passive bass extension.
The passive crossover has a satellite output with a switchable high-pass filter enabling the B15 to be used without additional system controllers together with various 8 ohm loudspeakers with one standard amplifier.
TECHNICAL DETAILS
Drivers | 1 × 15″ |
Frequency range | 40 Hz – 1500 Hz |
Power capacity program / peak | 1200 / 2000 W |
Impedance | 4 Ohms (2,5 Ohms in passive mode with M8 at highpass output) |
Coverage | omni |
Sensitivity 1 W / 1 m | 94 dB |
SPLmax / 1 m | 127 dB |
Connection | NL4 2± (bi-amp) NL4 1± (passive) |
Dimensions (H x W x D) | 506 × 440 × 560 mm |
Weight | 22,1 kg 24,2 kg with passive crossover |
Finish | Warnex texture paint |
Accessories | FDB15, CoverB15 |
Options | PWS15 internal passive crossover with biamped-passive switch, switchable highpass output for 8 Ohms satellite speaker, RAL colors |
B30
B30B30
B30Drivers | 2 × 15″ |
Frequency range | 35 – 200 Hz |
Power capacity program / peak | 2000 / 4000 W |
Impedance | 8 Ohms |
Coverage | omni |
SPLmax / 1 m | 133 dB |
Connection | NL4 2± |
Dimensions (H x W x D) | 706 × 446 × 800 mm |
Weight | 38,7 kg |
Finish | Warnex texture paint |
Accessories | FDB30, QDB30, CoverB30 |
Options | RAL colors |
D-One portable multi-functional active system
D-One portable multi-functional active systemD-One portable multi-functional active system
D-One portable multi-functional active system■ Woofer:2x8inch ferrite driver
■ Rate Power:200W(AES)
■ Frequency Response:40Hz-250Hz
■ Maximum SPL:115dB
■ Sensitivity:90dB
■ Nominal Impedance:4ohm
■ Dimension(mm):280x527x452(WxHxD)
■ Net Weight(kg):20.4
Power Amplifier Module
■ 4Line/Mic Input, 1 Stereo/Bluetooth/MP3/TF Card Input
■ Line or Mic Gain
■ APP Mobile Phone Software Control
■ Volume/EQ/Microphone Effect/Instrument Effect
connect the sound source
Power amplifier module (EIAJTHD=1%, 1KHZ)
■ 8 ohm 200W x 2
■ 4 ohm 400W x 2
■ RMS output voltage (THD=1%, 1KHZ): 49V 8ohm
■ THD+N (10% rated power) <0.6%
■ IMD-SMPTE (10% rated power) <0.9%
■ CROSSTALK:>65dB
■ Frequency response: -0.5dB 1dB 20-20KHz
■ Signal to noise ratio: >90dB >93dB (A right)
■ Power input: 220VAC 50/60HZ
Hill Audio 2 WAY ACTIVE ( SMA 1520 )
Hill Audio 2 WAY ACTIVE ( SMA 1520 )Hill Audio 2 WAY ACTIVE ( SMA 1520 )
Hill Audio 2 WAY ACTIVE ( SMA 1520 )DETAILS
FEATURES
*Hybrid bi-amplified concept (class-D LF amp & class-AB HF amp)
*Light-weight switch mode power supply
*Vented acoustic design with high-efficiency woofer
*Compression driver with fatigue-free polyester diaphragm
*4-Channel internal mixer with extra microphone and dual line inputs
*Tone adjustment and HPF for microphone input
*RCA & 3.5mm Mini TRS input for first stereo input
*Dual TRS for 2nd stereo input, with Hi-Z switch
*XLR main input | TRS parallel output | XLR link output
*Unique stereo link mode (keeps one/sends the other channel)
*Master volume control and 2-Band master EQ
*Thermal protection and limiter with control LED
*Light-weight impact-resistant Polypropylene (PP) plastic enclosure
*Asymmetric shape for use as main or monitor speaker
*Pole mount for 35mm tripods, stacking points on top and bottom
*Steel woofer protection grille and 2 carrying handles
*CE/ROHS compliant
TECHNICAL DATA
SMA-1520V2
*15’’/400W low frequency transducer with 2.5’’ voice coil
*1’’/25W high frequency compression driver with polyester diaphragm
*345W (EIA) / 250W (RMS) class D amplifier for low frequency transducer
*40W RMS class AB amplifier for high frequency driver
*Frequency response 50Hz-20kHz
*SPL 126dB
*Dispersion 120°x60°
*Dimensions 467*708*407.5mm WxHxD
*Weight 19.75 kg
Hill Audio 2 WAY ACTIVE Monitor ( SMA 1220V2 )
Hill Audio 2 WAY ACTIVE Monitor ( SMA 1220V2 )Hill Audio 2 WAY ACTIVE Monitor ( SMA 1220V2 )
Hill Audio 2 WAY ACTIVE Monitor ( SMA 1220V2 )SMA-1220V2
*12’’/300W low frequency transducer with 2.5’’ voice coil
*1’’/25W high frequency compression driver with polyester diaphragm
*345W (EIA) / 250W (RMS) class D amplifier for low frequency transducer
*40W RMS class AB amplifier for high frequency driver
*Frequency response 50Hz-20kHz
*SPL 125dB
*Dispersion 120°x60°
*Dimensions 385*576.5*346.5mm WxHxD
*Weight 15.25 kg
HILL AUDIO SMA1020 10″ ACTIVE SPEAKER
HILL AUDIO SMA1020 10″ ACTIVE SPEAKERHILL AUDIO SMA1020 10″ ACTIVE SPEAKER
HILL AUDIO SMA1020 10″ ACTIVE SPEAKERTECHNICAL DATA
– LF Amplifier : 150W class D
– LF Driver : 10” | 2” VC
– HF Amplifier : 40W class AB
– HF Driver : 1” with CD Horn
– Dispersion : 120º x 60º
– Frequency Response : 55Hz-20kHz ±1dB
– Max SPL : 119 dB
– Mounting Points : 2xM8 Bottom
– Handles : 1 (Top)
– Dimensions W*H*D : 321*503*291mm
– Weight : 11.0 kg
M10
M10M10
M10DETAILS
The M10 combines the advantages of the compact M8 with the imposing qualities of the high performance M12. The M10 is fitted with the same 1.4″ mid-high driver as the M12 and the M15, enabling a deep crossover frequency, thus giving a sound with the best possible intelligibility and directness. Something that you do not get every day within this class. The low-mid range is served by a 10″ driver with an extended voice coil for extra large linear excursion.
As a full range speaker, a compact monitor or a top, for instance in actively crossed over combination with a B18 or B30 subwoofer, the M10 offers a direct sound with plenty in reserve. Almost invisible. But impressively audible.
TECHNICAL DATA
Drivers | 1 × 10″ LF 1 × 1,4″ HF |
Frequency range | 68 – 19000 Hz |
Power capacity program / peak | 600 / 1200 W |
Impedance | 8 Ohms |
Coverage (h x v) | 75° × 50° HF-horn, rotatable |
Sensitivity 1 W / 1 m | 97 dB |
SPLmax / 1 m | 127 dB |
Connection | NL4 1± |
Dimensions (H x B x T) | 505 × 300 × 280 mm |
Weight | 15,2 kg |
Finish | Warnex texture paint |
Accessories | SBM10, CoverM10, CaseM10, QBM10 |
Options | left and right version, RAL colors |
M10
M10M10
M10Drivers | 1 × 10″ LF 1 × 1,4″ HF |
Frequency range | 68 – 19000 Hz |
Power capacity program / peak | 600 / 1200 W |
Impedance | 8 Ohms |
Coverage (h x v) | 75° × 50° HF-horn, rotatable |
Sensitivity 1 W / 1 m | 97 dB |
SPLmax / 1 m | 127 dB |
Connection | NL4 1± |
Dimensions (H x B x T) | 505 × 300 × 280 mm |
Weight | 15,2 kg |
Finish | Warnex texture paint |
Accessories | SBM10, CoverM10, CaseM10, QBM10 |
Options | left and right version, RAL colors |
T24
T24T24
T24DETAILS
The top T24 was our first product and already embodies everything that defines TW AUDiO today. There is a fundamental difference between just bringing a hornloaded high power top to the market and having the ambition to build the lightest, smallest and most powerful 2 x 12“ / 1.4“ horntop worldwide. Without dis regarding the claims of the audiophi le upper class the T24 is exemplary for the TW AUDiO philosophy.
With a complex horn-in-horn design it generates sound pressure above 143 dB peakSPL. We tweaked efficiency, impulse response and dispersion to the highest levels. Size and weight were reduced to the minimum.
And therefore this extremely compact top inspires with high power hand ling capacity, excellent dynamics and long throw as well as an optimum in vocal and speech intelligibility, even or especially when things have to get a bit louder ….
Accessories? Of course: the CBT24 cradlebar or SBT24 bracket can be fixed to the flying tracks on the sides with a simple latch. Without tools. Using the HSF adapter the T24 with bracket can even be mounted to a speaker tripod. The FDB30 front dolly with 100 mm wheels can be mounted to the front of the T24 for protection and transport. Easily cover it with the Cover T24.
TECHNICAL DATA
Drivers | 2 x 12″ LF 1 x 1,4″ HF |
Frequency range | 100 – 18000 Hz |
Power capacity program / peak | 1000 / 2000 W bi-amped LF 150 / 300 W bi-amped HF 1200 / 2000 W passive |
Impedance | 4 Ohms bi-amped LF 8 Ohms bi-amped HF 4 Ohm passive |
Coverage (h x v) | 60° x 40° HF-horn rotatable |
Sensitivity 1 W / 1 m | 107 dB bi-amped LF 112 dB bi-amped HF 110 dB passive |
SPLmax / 1 m | 143 dB |
Connection | 2 Speakon NL4 |
Dimensions (H x W x D) |
706 x 440 x 440 mm |
Weight | 45 kg 46 kg with passive crossover |
Finish | Warnex texture paint |
Accessoires | CaseT24, CoverT24, FDB30, SBT24, CBT24, BLT24, MCT24, BAT24, BBT24, BCT24 |
Options | PWT24 internal passive crossover, RAL colors |
Vera36
Vera36Vera36
Vera36DETAILS
VERA36’s intrinsic qualities speak for themselves – no fewer than six loudspeakers working in an enclosure that’s just 70 cm wide and 31 cm high. The central element is the mid-range horn, driven by two 8″ cone speakers, with the mid-high frequency unit comprising two 1.4″ compression drivers and a newly developed waveformer, positioned coaxially in the centre. The vertical dispersion is 10 degree, while 80 and 120 degree versions are available for the horizontal dispersion. The low-mid range is supplemented by two 10″ long excursion bass speakers. It is remarkable that below 400 Hz all four cone speakers work together providing impressive reserves of low-mid and punch.
All this means that VERA36 can compete with much bigger 2 × 12″ systems, sometimes even more…
But it’s not just an impressive sound performance that makes a modern loudspeaker system a success. Ease and safety of operation, a quick setup and dismantle are also required.
That’s not an issue with VERA36, thanks to a newly developed, fully integrated 3 point rigging system with its innovative mechanism featuring logarithmically allocated splay angles, enabling optimal array curving and precise aiming right into the back rows of even large venues.
Whether you’re rigging up the array from the floor as a caterpillar, lifting it vertically out of the case of dolly or building a ground stack – every variant is possible. Particularly easy. Particularly safe. Particularly fast.
Integrating up to 24 elements within regulation BGV C1.
TECHNICAL DATA
Drivers | 2 x 10″ LF 2 x 8″ MF 2 x 1,4″ HF |
Frequency range | 60 – 16000 Hz |
Power capacity program / peak | 1000 / 2000 W LF 800 / 1600 W MHF |
Impedance | 8 Ohms LF 8 Ohms MHF |
Coverage (h x v) | 80 ° x 10° oder 120° × 10° |
Sensitivity 1 W / 1 m | 98 dB LF 110 dB MHF |
SPLmax / 1 m | 141 dB |
Connection | NL4 1± MHF NL4 2± LF |
Dimensions (H x W x D) | 310 x 700 x 580 mm |
Weight | 41,6 kg |
Finish | Polyurea coating |
Accessories | RF900, LA900, ORF900, GSK36, DLV36, FDV36, Cover V36 |
Options | RAL colors (Warnex texture paint) |