SUB 18H Active Subwoofer
SUB 18H Active SubwooferSUB 18H Active Subwoofer
SUB 18H Active SubwooferTechnical Data
Speaker Type
Semi Horn-loaded Active Subwoofer
Acoustical data
Frequency Response
28 – 150 Hz
Max SPL
134 dB
Directivity
omnidirectional
LF
18″
Voice Coil LF
4″
Amplifier
Amp Technology
Digipro G3™
Amp Class
Class D
Power PRG
1500 W
Peak Power
2000 W
Power supply
1000 W SMPS with PSU Auto-range (110V~ and 220V~)
Processor
Controller
DSP 56 bit
AD/DA Coverters
24 bit/48 kHz
Limiter
Dual Active, RMS/Peak, Thermal
Crossover Frequency
90, 120 Hz
LF-Xover out slope
24 dB/Octave
Controls
X-Over frequency selection, Delay switch up to 4.5ms, Phase inversion switch, Outputs mode switch (Link/X-over), Mini-USB type “B” port (service data)
Input
Signal Input
2x XLR
Signal Output
2x XLR X-Over Out/Link Out
Mechanics
Housing
Plywood, Black PVC cover
Handles
2 (1xside)
Width
524 mm (20.6 in)
Height
711 mm (28 in)
Depth
695 mm (27.4 in)
Weight
41.4 kg (91.3 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
VIO S118 Flyable 1 X 18″ Horn Loaded Subwoofer
VIO S118 Flyable 1 X 18″ Horn Loaded SubwooferVIO S118 Flyable 1 X 18″ Horn Loaded Subwoofer
VIO S118 Flyable 1 X 18″ Horn Loaded SubwooferDETAILS
A flyable active subwoofer, equipped with a 18” neodymium woofer and crafted to complete with impressive low-end frequencies and vigorous SPL VIO L210’s accurate, phase coherent wave front. * Flyable and groundstack configurations require dedicated adapters FSA-VIOL210 and GSA-VIOL210] dBTechnologies developed a horn loaded design, while maintaining the size of a front-loaded sub cabinet, resulting in a double advantage: smaller dimension (and weight – only 45,1 kg) and a remarkable lower frequencies response even at a long distance. This makes this sub the perfect low-end extension of VIO arrays whenever a particularly long-throw is needed. The system’s acoustical plus points are boosted by Digipro G4® 1600W Class D amplifier, the last generation of the Digipro amp technology which strongly contributed to the success of many dBTechnologies’ professional powered series. Equipped with PFC (Power Factor Correction) and SMPS , VIO S118 is highly resistant to line voltage fluctuations. Digipro G4 pre-amp features a slot module allowing system monitoring and control via RD Net. Furthermore, the system is ready for future upgrades with DanteTM digital audio transmission network: in facts, VIO S118 also features a NFC system and a LED on the front grille. The amps also allows users to run auto-test on electronics and transducers before and after use. The amp module features an on board attenuation control and a delay module allowing to reach a max 9.9 ms delay with 0.1 ms steps. The on board cardioid preset process the sound of the backward sub in cardioid configurations (both flown or groundstacked). S118’s cabinet is made of sturdy Multiplex plywood covered with a black polyuria finish and equipped with integrated hardware allowing 1 or more subs to be flown in a sub array or on the top of a VIO L210 array. The system can be flown via DRK-210 flybar plus FSA-VIO L210 adapter for attaching VIO L210. GSA VIO L210 is necessary for stacked configurations with VIO L210. The dedicated DO-VIOS118 trolley can be hooked directly on flown subs easing dismantling and transport operations.
VIO S118R F 1 X 18″ Bass Reflex VIO S118R F 1 X 18″ Bass Reflex
VIO S118R F 1 X 18″ Bass Reflex VIO S118R F 1 X 18″ Bass ReflexVIO S118R F 1 X 18″ Bass Reflex VIO S118R F 1 X 18″ Bass Reflex
VIO S118R F 1 X 18″ Bass Reflex VIO S118R F 1 X 18″ Bass ReflexTechnical Data
Speaker Type – Active Bass Reflex Subwoofer
Acoustical data
Frequency Response – 35 Hz to Cut Freq (X-Over Dependent)
Frequency Response – 32 Hz
Max SPL – 139 dB
LF – 1×18″
Voice Coil LF – 4 ”
Directivity – Omnidirectional
Amplifier
Amp Technology – Digipro® G4
Amp Class – Class D
RMS Power – 1600 W
Peak Power – 3200 W
Cooling – Convection + Internal Fan
Power Supply – Full-range PSU with PFC
Processor
Controller – DSP 32 Bit
AD/DA Converter – 24 bit 96 kHz
Limiter – RMS, Peak, Thermal
Delay Option – 0- 9.9 ms | steps of 0.1 ms
0 – 62 ms
Crossover Frequency LF-HF – Selectable 60-110Hz + Full range
LF-Xover out slope – 24 dB/Octave
Input
Signal Input – 1xXLR balanced
Signal Output – 1x XLR balanced (link or X-over)
1xRJ45 LINK (RDNet)
Expansion Card – RDNet Card (1x RJ45 IN 1x RJ45 Link)
Dante card
Mains Connections – 1x PowerCON TRUE1 In
1x PowerCON TRUE1 Out
Controls – 1x Input Attenuation Rotary Switch
1x Rotary Encoder (Delay 9.9 ms)
1x Polarity Inversion Switch (0° or 180°)
1x Cardioid Mode Switch
1x X-Over Freq Switch (60-110 Hz + Full Range
1x System Auto-test
Mechanics
Housing – Multiplex plywood
Polyurea painted
Handles – 2x Per Side
Aluminium
Pole Mount – M20 Thread
Raincover – Included
Width – 720 mm (28.34 in)
Height – 520 mm (20.47 in)
Depth – 695 mm (27.36 in)
Weight – 47 kg (103.62 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
VIO S218 Active Bass Reflex Subwoofer
VIO S218 Active Bass Reflex SubwooferVIO S218 Active Bass Reflex Subwoofer
VIO S218 Active Bass Reflex SubwooferTECHNICAL DATA
Speaker Type – Active Bassreflex subwoofer
ACOUSTICAL DATA
Frequency Response – 27 Hz (HPF)
Frequency Response – 28 Hz to cut frequency (Xover dependent)
Max SPL – 143 dB
LF – 2×18” Neodymium
Voice Coil LF – 4”
Directivity – Omnidirectional
AMPLIFIER
Amplifier – 3200 W RMS
Cooling – Passive convection, internal fan
Power Supply – Full-range SMPS with PFC (100V~-240V~, 50-60Hz)
PROCESSOR
Controller – DSP 32 bit
AD/DA Converter – 24 bit/96 kHz
Limiter – Peak, RMS, Thermal
Delay Option – 0 – 9.9 ms internal | steps of 0.1 ms
Crossover Frequency LF-HF – Selectable 60-110 Hz + Full Range (8 steps)
LF-Xover out slope – 24 dB/Octave
INPUT
Signal Input – 1 x XLR balanced, 1 x RJ45 Link (RDNet)
Signal Output – 1x XLR balanced, 1 x RJ45 Link (RDNet)
Power Socket – 1x PowerCON TRUE1 In
1x PowerCON TRUE1 Out
Controls 1x Input Attenuation Rotary Encoder
2x Delay Rotary Encoder (0-9.9 ms)
1x Polarity Inversion Switch (0° or 180°)
1x Cardioid mode Switch
1x X-Over Frequency Rotary Encoder (8 steps)
Special Features NFCTM and Frontal LED Identification System
380V Resistant SMPS
IPOS Intelligent Power-On Sequence
Opto-isolated floating pre-amp
System Test (transducers diagnostics)
MECHANICS
Housing – Multiplex plywood – Polyurea painting
Handles – 4x Side. Aluminium
Raincover – Included
Rigging Points – 2x Pick Points on top for DRK-210 rigging frame
Width – 1300 mm (51.18 in)
Height – 520 mm (20.47 in)
Depth – 800 mm (31.5 in)
Weight – 85.6 kg (188.72 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.